DIN 8555 | DIN EN 14700
MF 10-60-G | T Fe 14-60-G
C-, Cr-, Mo-alloyed flux-cored wire electrode for hardfacing on parts that are exposed to high abrasive mineral wear. In comparison to Corodur 55, the weld deposit of this electrode has a higher temperature resistance (up to 450°C). Used for pumps, mixer parts and conveyer screws.
DIN EN 14700 | DIN 8555
T Z Fe14 | MF 10-60-G
CORODUR 56 is a flux-cored wire electrode, which is highly C- and Cr- alloyed. The high content of hard hypereutectic phases M7C3 makes the alloy suitable for high abrasive wear. The weld deposit has a high corrosion resistance. Best results are achieved by welding in 2-3 layers with max. 10 mm thickness. The deposit should be subjected to little impact stress. Before cladding sensitive
base materials and overlaying old previously hardfaced surfaces a ductile buffering layer of CORODUR 200 K or 250 K is recommended.
Wear plates, ventilators, coke oven carriage, NI-Hard IV
DIN EN 14700 | DIN 8555
T Z Fe14 | MF 10-60-GR
CORODUR 59 is a highly C- Cr - alloyed flux- cored wire for applications in high mineral wear. It is suitable for hard facing of parts that are exposed to high abrasion in wet areas. The overlaying thickness should not exceed 10mm which means a deposit of 2-3 layers. The deposit should be subjected to little impact stress.
Farming, gravel digger, Pumps, mixer paddles, concrete pumps, conveyor screws, impeller screws, track hoppers
DIN EN 14700 | DIN 8555
T Fe14 | MF 10-60-CGT
CORODUR 59 L is a highly C- Cr- Mo alloyed flux- cored wire for applications in high mineral wear with a corrosion resistant matrix. It is suitable for hard facing of parts that are exposed to high abrasion and partly corrosion. The overlaying thickness should not exceed 8-10mm which means a deposit of 2-3 layers. The deposit should be subjected to little impact stress. A crack free welding is possible with preheating- and interpass- temperature of min. 450 °C and oven cooling.
Kneading machines, liners, pumps, mixer parts, conveyer screws, mixer paddles, oil screws