CORODUR® 59
CLASSIFICATION
DIN EN 14700 | DIN 8555
T Z Fe14 | MF 10-60-GR
GENERAL CHARACTERISTICS
CORODUR 59 is a highly C- Cr - alloyed flux- cored wire for applications in high mineral wear. It is suitable for hard facing of parts that are exposed to high abrasion in wet areas. The overlaying thickness should not exceed 10mm which means a deposit of 2-3 layers. The deposit should be subjected to little impact stress.
APPLICATION
Farming, gravel digger, Pumps, mixer paddles, concrete pumps, conveyor screws, impeller screws, track hoppers
TYPICAL ALL WELD METAL ANALYSIS (%)
| C | Si | Mn | Cr |
| 5,0 | 1,2 | 0,4 | 33,0 |
TYPICAL ALL WELD METAL MECHANICAL PROPERTIES
Hardness: 59 – 61 HRc
PARAMETER
| Diameter | Voltage | Amps |
| 1,6 | 20-26 | 160-260 |
| 2,0 | 22-26 | 240-280 |
| 2,4 | 24-27 | 280-340 |
| 2,8 | 25-28 | 320-400 |
FORMS OF DELIVERY
| Coil "BS 300" = 15 kg | Coil "BS 450" = 25 kg | Drums = 300 kg |
OA = gasless, G = gas shielded, SA = Submerged Arc
Corodur Fülldraht GmbH may change the characteristics of the wire without notice. Statements on composition and application are just for the applier’s information. Statements on mechanical properties always refer to the all-weld-metal according to valid standards. We recommend the applier to check our products for their special application autonomously.