CORODUR® 59 L
CLASSIFICATION
DIN EN 14700 | DIN 8555
T Fe14 | MF 10-60-CGT
GENERAL CHARACTERISTICS
CORODUR 59 L is a highly C- Cr- Mo alloyed flux- cored wire for applications in high mineral wear with a corrosion resistant matrix. It is suitable for hard facing of parts that are exposed to high abrasion and partly corrosion. The overlaying thickness should not exceed 8-10mm which means a deposit of 2-3 layers. The deposit should be subjected to little impact stress. A crack free welding is possible with preheating- and interpass- temperature of min. 450 °C and oven cooling.
APPLICATION
Kneading machines, liners, pumps, mixer parts, conveyer screws, mixer paddles, oil screws
TYPICAL ALL WELD METAL ANALYSIS (%)
C | Si | Mn | Cr | Mo |
3,7 | 1,2 | 0,6 | 33,0 | 0,5 |
TYPICAL ALL WELD METAL MECHANICAL PROPERTIES
Hardness: 56 - 59 HRc
PARAMETER
Diameter | Voltage | Amps |
1,6 | 20-27 | 160-260 |
2,0 | 22-28 | 240-300 |
2,4 | 24-29 | 280-340 |
2,8 | 26-29 | 320-400 |
FORMS OF DELIVERY
Coil "BS 300" = 15 kg | Coil "BS 450" = 25 kg | Drums = 300 kg |
OA = gasless, G = gas shielded, SA = Submerged Arc
Corodur Fülldraht GmbH may change the characteristics of the wire without notice. Statements on composition and application are just for the applier’s information. Statements on mechanical properties always refer to the all-weld-metal according to valid standards. We recommend the applier to check our products for their special application autonomously.