CORODUR® TS 309 L

CLASSIFICATION

T 23 12 L R M 3 ( C3 )
T 309 LT0 1- 4
1.4332

GENERAL CHARACTERISTICS

Flux cored wire for joining difficult-to-weld steels and for corrosion - proof plating. An austenitic 18/10 type Cr-Ni- weld metal can be obtained already in the first layer. The alloy is also suitable for buffer layers on plated metal sheets. The highly alloyed weld metal deposited by the wire ensures crack - proof welds and is scale-resistant up to 1000°C. The deposits are capable of taking high polish.

APPLICATION

Joints of 1.4583 with H I / H II, 17 Mn 4, StE 355,
P235GH P256GH,
P295GH, P355N
1.4825 GX25CrNiSi18-9    1.4826 GX40CrNiSi22-9
1.4828 X15CrNiSi20-10    1.4832 GX25CrNiSi20-14

Datasheet

CORODUR® TS 309 L MO

CLASSIFICATION

T 23 12 2 L R M 3 ( C3 )
T 309 L Mo T0 1- 4
1.4459

GENERAL CHARACTERISTICS

Flux cored wire with an alloyed core, suitable for joining difficult-to-weld steels and for corrosion-proof claddings. An austenitic weld metal (Cr Ni Mo 18/ 10/ 2) is obtained already in the first layer. The alloy is also suitable for welding buffer layers on plated metal sheets and for joining austenitic to ferritic steels which are subject to service temperatures of up to 350° C. Due to its high alloy level CORODUR TS 309 L Mo produces crack-proof welds. The addition of molybdenum ensures higher corrosion resistance and higher tensile-strength at elevated temperatures, as compared to the moly-free material 1.4829. The weld metal is heat resistant and non-scaling up to 1050° C.

APPLICATION

Dissimilar joints of:
1.4583 with H I / H II. 17 Mn 4. StE 355.
1.4583 with P235GH / P256GH, P295GH, P355N
Buffering before cladding
Joining of stainless steels to mild or low-alloyed steels at high dilution levels

Datasheet

CORODUR® TS 308 L

CLASSIFICATION

T 19 9 L R M 3 ( C3 )
T 308 LT0 1- 4
1.4316

GENERAL CHARACTERISTICS

Flux cored wire for joining corrosion-proof Cr-Ni- steels with low carbon content as well as stabilised and non-stabilised steels of identical or similar characteristics which are resistant to chemical agents. Used on a base metal of identical characteristics the weld metal is resistant to wet corrosion up to 350° C and is scale resistant up to 800°C in an air and oxidising gases atmosphere. No intercrystalline corrosion due to low carbon content. The deposits are capable of taking high polish.

APPLICATION

1.4306 X2CrNi19-11         1.4312 GX10CrNi18-10
1.4311 X2CrNi18-10         1.4541 X6CrNiTi18-10
1.4300 X 12 CrNi 18 8      1.4550 X6CrNiTi18-10
1.4301 X5CrNi18-10         1.4552 GX5CrNiNb19-11
1.4308 GX5CrNi19-10

Datasheet

High-alloy flux-cored wires

Title Composition according to manufacturer
  C Si Mn Cr Ni Mo Nb Fe
CORODUR® TS 308 L 0,03 0,7 1,4 20,0 10,5





CORODUR® TS 309 L 0,03 0,7 1,4 23,5 13,0      
CORODUR® TS 309 L Mo 0,03 0,8 1,4 23,0 13,5 2,8    
CORODUR® TS 312 0,03 0,8 1,3 29,0 9,0 0,40    
CORODUR® TS 316 L 0,03 0,8 1,4 19,0 12,0 3,0    
CORODUR® TS 318 L 0,03 0,9 1,5 19,5 12,0 2,9 0,45  
COROLOY® TS 625 0,04 0,3 0,4 22,0 Basis 9 3,5 <6

Corodur Fülldraht GmbH may change the characteristics of the wire without notice. Statements on composition and application are just for the applier’s information. Statements on mechanical properties always refer to the all-weld-metal according to valid standards. We recommend the applier to check our products for their special application autonomously.

  • 1
  • 2