CORODUR® 64
CLASSIFICATION
DIN EN 14700 | DIN 8555
T Fe16 | MF 10-65-GZ
GENERAL CHARACTERISTICS
CORODUR 64 is a highly C- Cr- B- W- V- alloyed flux-cored wire electrode that deposits a very hard martensitic micro structure with carbides. The deposit is resistant to strong mineral abrasion also at higher temperatures. This wire can be used for one layer welding without a big decrease of hardness. The decrease of hardness is approx. 10% at 400 °C and approx. 25% at 600 °C.
APPLICATION
Cement, mineral and brick industry, steel industry, refuse-incinerator plants, composting plants, mineral crushing, paddle wheels
TYPICAL ALL WELD METAL ANALYSIS (%)
C | Si | Mn | Cr | V | W | B |
4,5 | 1,0 | 1,6 | 24,0 | 0,8 | 0,8 | 1,0 |
TYPICAL ALL WELD METAL MECHANICAL PROPERTIES
Hardness: 63 - 65 HRc
(1. layer app. 60 HRc)
PARAMETER
Diameter | Voltage | Amps |
1,2 | 20-24 | 160-240 |
1,6 | 20-26 | 180-300 |
2,0 | 22-26 | 220-320 |
2,4 | 24-27 | 280-340 |
2,8 | 25-28 | 320-400 |
FORMS OF DELIVERY
Coil "BS 300" = 15 kg | Coil "BS 450" = 25 kg | Drums = 300 kg |
OA = gasless
Corodur Fülldraht GmbH may change the characteristics of the wire without notice. Statements on composition and application are just for the applier’s information. Statements on mechanical properties always refer to the all-weld-metal according to valid standards. We recommend the applier to check our products for their special application autonomously.