CORODUR® SP 101
Flux cored wires for Thermal Spray Application
EN ISO 14919 – 5 – 1,6 - 4
MATERIAL REVIEW
Corrosion resistant alloy in combination with very high resistance against abrasion, in particular metal on metal friction. Designed for arc spraying but may also be sprayed by wire- and highvelocity- wire-flame-spraying.
APPLICATION
Typical applied on grinding areas, pressure and conveyor screws, mixer, sieves.
COMPOSITION (Weight.-% )
| Fe | Cr | Ni | B | Mo | Nb |
W |
C |
| Bal. | 22 | 0,5 | 4,5 | 4 | 3,5 | 6,5 | 1,2 |
PHYSICAL PROPERTIES OF THE COATING
Hardness: 68-70 HRC
Melting point: ~ 1430 °C
Spray rate: 4,3 kg/h / 100 A
Wire consumption: 1,0 kg/m2 / 0,1 mm
SPRAY PROCEDURE (Arc)
| Atomizing Air Pressure |
Nozzle Cap |
Arc Load Volt |
Ampere | Stand off mm |
Coating thickness / pass mm/pass |
Deposit Efficiency % |
|
| Standard 1,6 | 3,5 bar | 30-32 | 100-200 | 75-125 | 0,125 |
SALES UNIT
| Coil | "BS 300" = 15 kg | "BS 450" = 25 kg | Other dimensions on request |
| Wire Diameter | 1,6 mm (1/16") | 2,4 mm |
Corodur Fülldraht GmbH may change the characteristics of the wire without notice. Statements on composition and application are just for the applier’s information. Statements on mechanical properties always refer to the all-weld-metal according to valid standards. We recommend the applier to check our products for their special application autonomously.