CORODUR® TS 308 L
CLASSIFICATION
T 19 9 L R M 3 ( C3 )
T 308 LT0 1- 4
1.4316
GENERAL CHARACTERISTICS
Flux cored wire for joining corrosion-proof Cr-Ni- steels with low carbon content as well as stabilised and non-stabilised steels of identical or similar characteristics which are resistant to chemical agents. Used on a base metal of identical characteristics the weld metal is resistant to wet corrosion up to 350° C and is scale resistant up to 800°C in an air and oxidising gases atmosphere. No intercrystalline corrosion due to low carbon content. The deposits are capable of taking high polish.
APPLICATION
1.4306 X2CrNi19-11 1.4312 GX10CrNi18-10
1.4311 X2CrNi18-10 1.4541 X6CrNiTi18-10
1.4300 X 12 CrNi 18 8 1.4550 X6CrNiTi18-10
1.4301 X5CrNi18-10 1.4552 GX5CrNiNb19-11
1.4308 GX5CrNi19-10
TYPICAL ALL WELD METAL ANALYSIS (%):
| C | Si | Mn | Cr | Ni |
| 0,03 | 0,7 | 1,4 | 20,0 | 10,5 |
TYPICAL ALL WELD METAL MECHANICAL PROPERTIES
| Tensile strength Rm N/mm² |
Yield strength Rp0,2 N/mm² |
Elongation A5 % |
Impact strength (J) |
| 620 | 460 | 36 | - 196 C°; 32 |
FORMS OF DELIVERY
| Diameter / mm | Sales units |
Shielding gas |
| 0,9 | BS 300 | Argon + Co2 |
| 1,2 | BS 300 | Argon + Co2 |
| 1,6 | BS 300 | Argon + Co2 |