CORODUR® 814
CLASSIFICATION
DIN EN 14700
T Fe8
GENERAL CHARACTERISTICS
CORODUR 814 is a Cr- Mo- Ni- alloyed weld deposit with excellent properties of resistance to impact at higher temperature. The wire is designed for maintenance of hot working tools and to increase their service life. For dies subjected to high heat and stress when a machinable deposit is required.
Typical all weld metal analysis %
| C | SI | Mn | Cr | Ni | Mo |
| 0,20 | 0,6 | 0,6 | 10,0 | 1,7 | 3,0 |
| Co | Nb | V | W | Fe | other |
| - | - | 0,25 | - | - | Ti 0,2 |
TYPICAL ALL WELD METAL MECHANICAL PROPERTIES:
Hardness: 44 – 48,5 HRc
Tensile strength: 1400 - 1600 N/mm²
Parameter
| Diameter | Voltage | Ampere |
|
1,6 |
22-26 |
180-240 |
|
2,4 |
25-27 |
260-300 |
|
2,8 |
26-28 |
280-340 |
Forms of delivery
| Kind | Coil BS 300 | Coil B 450 | Drums | - |
|
Weight |
15kg | 25 kg | 300kg | - |
Corodur may change the chararcteristics of the wire without notice. Statements on composition an application are just for the applier's information. Statements on mechanical properties always refer to the all-weld-metal according to valid standards. We recommend the applier to check our products for their special application autonomously.