CORODUR® 240 K
CLASSIFICATION
DIN EN 14700 | DIN 8555
T Fe9 | MF 7-200-KNP
GENERAL CHARACTERISTICS
The flux-cored wire electrode is suitable for welding parts of manganese steel ("Hadfield" type), which are exposed to high impact wear and tear. The non-magnetic austenitic deposit is tough, crack-free and work hardening. The Weld process should be adjusted as cold as possible due to grain growth and embrittlement at higher temperatures of 400°C. Typical applications can be found in the rebuilding of crusher jaws, railroad components, bucket teeth and lips, and it is designed for reclaiming worn parts of manganese base material..
APPLICATION
Crushers, swing hammers, railway crossings, dredger buckets
TYPICAL ALL WELD METAL ANALYSIS ( % ):
C | Si | Mn | Cr | Ni |
1,1 | 0,3 | 14,0 | 4,0 | 0,6 |
TYPICAL ALL WELD METAL MECHANICAL PROPERTIES
Hardness pure weld metal: 200 - 230 HB
Work hardened: 450 HB
PARAMETER
Dia | Voltage | Amps |
1,2 | 20-24 | 150-200 |
1,6 | 22-26 | 180-240 |
2,0 | 25-27 | 220-260 |
2,4 | 25-27 | 260-300 |
2,8 | 26-28 | 280-340 |
FORMS OF DELIVERY
Coil "BS 300" = 15 kg | Coil "BS 450" = 25 kg | Drums = 300 kg |
OA = gasless, G = gas shielded, SA = Submerged Arc
Corodur Fülldraht GmbH may change the characteristics of the wire without notice. Statements on composition and application are just for the applier'sinformation. Statements on mechanical properties always refer to the all-weld-metal according to valid standards. We recommend the applier to check our products for their special application autonomously.