CORODUR® SP 118 Y
Flux cored wires for Thermal Spray Application
EN ISO 14919 – 5 – 1,6 - 4
MATERIAL REVIEW
Ferritic iron-chromium-aluminium alloy with addition of Yttrium (FeCrAlY). Resistant to hightemperature oxidation up to 500°C, corrosion protection in Sulfur and Carbon atmospheres. Good machinability. Designed for arc spraying but may also be sprayed by wire- and high-velocitywire- flame-spraying.
APPLICATION
Dense bond coat, eg. used on boiler tubes.
COMPOSITION (Weight.-%)
Fe | Cr | AL | Y |
Bal. | 22 | 5 | 1 |
PHYSICAL PROPERTIES OF THE COATING
Hardness: 170-270 HV0,3
Melting point: ca 1500 °C
Density: 7,15 g/dm3
SPRAY PROCEDURE (Arc)
Atomizing Air Pressure | Nozzle Cap | Arc Load Volt | Ampere | Stand off mm | Coating thickness / pass mm/pass | Deposit Efficiency % | |
Standard 1,6 | 3,5 bar | 30-32 | 100-200 | 75-175 | 0,125 | 70% |
SALES UNIT:
Coil | "BS 300" = 15 kg | "BS 450" = 25 kg | Other dimensions uppon request |
Wire diameter | 1,6 mm (1/16") | 2,4 mm |
Corodur Fülldraht GmbH may change the characteristics of the wire without notice. Statements on composition and application are just for the applier’s information. Statements on mechanical properties always refer to the all-weld-metal according to valid standards. We recommend the applier to check our products for their special application autonomously.