CORODUR® SP 113

Flux cored wires for Thermal Spray Application

EN ISO 14919 – 5 – 1,6 - 4

MATERIAL REVIEW

Austenitic corrosion resistant alloy comparable to 316L. Good machinability. Designed for arc spraying but may also be sprayed by wire- and high-velocity-wire-flame-spraying.

APPLICATION

Used for repair of machinery components.

COMPOSITION (Weight-% )

Fe Cr Ni Si Mn Mo
C
Bal. 18 12 0,8 1,7 2,7 0,12

PHYSICAL PROPERTIES OF THE COATING

Hardness: 200 – 240 HV0,1
Melting point: ~ 1430 °C
Density: 6,93 g/dm3
Spray rate: 4,3 kg/h / 100 A
Wire consumption: 1,0 kg/m2 / 0,1 mm

SPRAY PROCEDURE (Arc)

  Atomizing
Air
Pressure
Nozzle
Cap

Arc Load
Volt
Ampere Stand off
mm
Coating
thickness
/ pass
mm/pass
Deposit
Efficiency
%
Standard 1,6 3,5 bar   29-30 50-300 125-175 0,125 80%

SALES UNIT

Coil "BS 300" = 15 kg "BS 450" = 25 kg Other dimensions on
request
Wire Diameter 1,6 mm (1/16") 2,4 mm  

Corodur Fülldraht GmbH may change the characteristics of the wire without notice. Statements on composition and application are just for the applier’s information. Statements on mechanical properties always refer to the all-weld-metal according to valid standards. We recommend the applier to check our products for their special application autonomously.

PDF DATASHEET