CORODUR® 75
CLASSIFICATION
DIN EN 14700 | DIN 8555
T Fe16 | MF 10-65-GZ
GENERAL CHARACTERISTICS
High C- Cr- Nb- Mo- W- V-alloyed flux-cored wire electrode for high mineral wear and use at higher temperatures. The wear resistance is up to 700°C nearly constant. The hardness reduction at a temperature of 400°C is approximately 6% and at 700°C approximately 15 %.
APPLICATION
Blast-furnace-gas bells, Slag conveyer screws, hot sinterbreaker, coke industy, coal power stations
TYPICAL ALL WELD METAL ANALYSIS (%)
C | Si | Mn | Cr | Mo | Nb | V | W |
5,0 | 1,2 | 0,6 | 22,0 | 4,5 | 6,4 | 0,8 | 1,2 |
TYPICAL ALL WELD METAL MECHANICAL PROPERTIES
Hardness: 62 – 64 HRc
PARAMETER
Diameter | Voltage | Amps |
1,6 | 20-26 | 180-280 |
2,0 | 22-26 | 240-300 |
2,4 | 24-27 | 280-340 |
2,8 | 25-28 | 320-400 |
FORMS OF DELIVERY
Coil "BS 300" = 15 kg | Coil "BS 450" = 25 kg | Drums = 300 kg |
OA = gasless, SA = Submerged Arc
Corodur Fülldraht GmbH may change the characteristics of the wire without notice. Statements on composition and application are just for the applier’s information. Statements on mechanical properties always refer to the all-weld-metal according to valid standards. We recommend the applier to check our products for their special application autonomously.