COROLOY SE 1/58
CLASSIFICATION
DIN EN 14700 DIN 8555
T Z Ni1 MF 22-60-CGTZ
GENERAL CHARACTERISTICS
SE 1/58 is a Ni- Si- Cr- B- alloy. This alloy leaves a nickel base weld deposit. The essential characteristics correspond to the Cobalt-base alloys, especially the hardness, corrosion resistance, pitting (inter granular corrosion), heat resistance, wear resistance and thermal shock constancy. Applications are found in the chemical industry, nuclear technology field, etc. Preheating depends
on base material (min. 350°C is necessary) in order to prevent cracking.
APPLICATION
Fittings, chemical industry, food industry, nuclear technology, extrusion screws.
TYPICAL ALL WELD METAL ANALYSIS ( % ):
| C | Si | Cr | Ni | B | Fe |
| 0,75 | 4,7 | 20,0 | Rest | 3,2 | <5,0 |
TYPICAL ALL WELD METAL MECHANICAL PROPERTIES
Hardness: 55 - 60 HRC
PARAMETER
| Diameter | Voltage | Amps |
| 1,6 | 22-26 | 180-240 |
| 2,0 | 25-27 | 220-260 |
| 2,4 | 25-27 | 260-300 |
| 2,8 | 26-28 | 280-340 |
FORMS OF DELIVERY
| Coil "BS 300" = 15 kg | Coil "BS 450" = 25 kg | Drums = 300 kg |
Corodur Fülldraht GmbH may change the characteristics of the wire without notice. Statements on composition and application are just for the applier’s information. Statements on mechanical properties always refer to the all-weld-metal according to valid standards. We recommend the applier to check our products for their special application autonomously.