CORODUR® 450
CLASSIFICATION
DIN EN 14700 DIN 8555
T Fe1 MF 5-45-PT
GENERAL CHARACTERISTICS:
CORODUR 450 is a tubular wire that produces a low alloyed deposit for hardfacing of approximately 450 HB. The deposit is tough and resistant to impact loads. Deposits are forgeable and machinable.
APPLICATION
crane wheels, rails, guiding rolls, hydraulic cylinders
TYPICAL ALL WELD METAL ANALYSIS ( % ):
C | Si | Mn | Cr | Mo | V |
0,25 | 0,8 | 1,0 | 3,5 | 0,4 | 0,2 |
TYPICAL ALL WELD METAL MECHANICAL PROPERTIES
Hardness: 42 - 45 HRc
PARAMETER
Diameter | Voltage | Amps |
1,2 | 20-24 | 150-200 |
1,6 | 22-26 | 180-240 |
2,0 | 25-27 | 220-260 |
2,4 | 25-27 | 260-300 |
2,8 | 26-28 | 280-340 |
FORMS OF DELIVERY
Coil "BS 300" = 15 kg | Coil "BS 450" = 25 kg | Drums = 300 kg |
Corodur Fülldraht GmbH may change the characteristics of the wire without notice. Statements on composition and application are just for the applier’s information. Statements on mechanical properties always refer to the all-weld-metal according to valid standards. We recommend the applier to check our products for their special application autonomously.