CORODUR® 601
CLASSIFICATION
DIN EN 14700 | DIN 8555
T Fe3 | MF 6-60-PT
GENERAL CHARACTERISTICS
CORODUR 601 is a Cr- Mo- V- W- alloyed weld deposit with excellent properties of resistance to abrasion and impact. The deposit has a high heat resistance up to 550°C. Deposits can be heat treated to increase the hardness. For base materials that are difficult to weld, a buffer layer of 200 K or 250 K is recommended. Preheating is recommended. For use on hammer and blooming table rolls, blowbars and bucket teeth.
APPLICATION
Screws, crusher hammers, drive tumblers
TYPICAL ALL WELD METAL ANALYSIS ( % ):
C | Si | Mn | Cr | Mo | V | W |
0,5 | 1,0 | 3,0 | 6,5 | 1,5 | 1,5 | 1,0 |
TYPICAL ALL WELD METAL MECHANICAL PROPERTIES
Hardness: 55 - 58 HRc
PARAMETER
Diameter | Voltage | Amps |
1,2 | 20-24 | 150-200 |
1,6 | 22-26 | 180-240 |
2,0 | 25-27 | 220-260 |
2,4 | 25-27 | 260-300 |
2,8 | 26-28 | 280-340 |
FORMS OF DELIVERY
Coil "BS 300" = 15 kg | Coil "BS 450" = 25 kg | Drums = 300 kg |
Corodur Fülldraht GmbH may change the characteristics of the wire without notice. Statements on composition and application are just for the applier’s information. Statements on mechanical properties always refer to the all-weld-metal according to valid standards. We recommend the applier to check our products for their special application autonomously.