CORODUR® E WZ 50
CLASSIFICATION
DIN EN 14700
E Fe3
GENERAL CHARACTERISTICS
AC-weldable high-quality electrode with approx. 120 % recovery. Used for repairing steels of same type, e.g. on hot working tools, and for overlaying edges or surfaces of tools made of low alloyed high density steels. Typical applications: slab shears, hot shear blades, drawing blocks, hot-forging dies, impact moulding dies, containers, swages etc. Preheating- and interpass temperature should be held between 300 and 450°C, depending on the base metal and its heat abduction. The upper temperature limit should be chosen for thick workpieces. Low-tension welding and low heat input are essential for a good welding result. Slowly cool down in sand or oven.
APPLICATION
1.2365 / 1.2713 / 1.2567 / 1.2714 / 1.2581
TYPICAL ALL WELD METAL ANALYSIS (%):
C | Cr | W | V |
0,3 | 2,2 | 4,2 | 0,6 |
TYPICAL ALL WELD METAL MECHANICAL PROPERTIES
Hardness: 44 – 47 HRc
CURRENT
= + / ~ 65 V
WELDING POSITIONS
PA, PB, PC, PD, PE, PF
REBAKING
1 h, 300 °C + / - 10 °C (if required)