CORODUR® 51
CLASSIFICATION
DIN 8555 | DIN EN 14700
MF 10-55-G | T Fe 15-55-G
GENERAL CHARACTERISTICS
CORODUR 51 OA is a flux-cored wire which deposits a martensitic matrix with a high content of Cr-Carbides M7C3 with excellent resistance to abrasion and medium impact up to 450°C. It can be applied whenever high abrasion is expected. Best results are achieved by welding in two layers. The deposit can not be machined or forged. Before overlaying old previously hardfaced surfaces a buffering layer of CORODUR 200 K or CORODUR 250 K is recommended.
APPLICATION
Pumps, mixer parts, conveyer screws, shovel-bucket, scrapers, blades, fan-blades
Typical all weld metal analysis %
C | SI | Mn | Cr | Ni | Mo |
4,5 | 1,2 | 0,4 | 21,0 | - | - |
Co | Nb | V | W | Fe | other |
- | - | - | - | - | B+ |
Parameter
Measurement | Voltage | Ampere |
1,2 |
18 - 24 |
120 - 180 - 28 30 300 - - |
Forms of delivery
Kind | Coil BS 300 | Coil B 450 | Pay off pack | - |
Weight |
15kg | 25 kg | 300kg | - |
Corodur may change the chararcteristics of the wire without notice. Statements on composition an application are just for the applier's information. Statements on mechanical properties always refer to the all-weld-metal according to valid standards. We recommend the applier to check our products for their special application autonomously.