CORODUR® 600
CLASSIFICATION
DIN EN 14700 | DIN 8555
T Fe3 | MF 6-60-RP
GENERAL CHARACTERISTICS
C- Mn- Cr- Mo- V- alloyed flux-cored wire electrodes for abrasion and impact resistant hardfacing. The deposit is crack-free, hard, though and heat resistant up to 500°C. An increase of hardness by annealing is possible. For base materials that are difficult to weld, a buffer layer of 200 K or 250 K is recommended. Preheating is recommended. Applications are crusher wheels, dredger parts, pan grinders, and as the final layer for hardfacing manganese steel.
APPLICATION
dredging parts, gravel pumps, blowbars, screws, crusher hammers, drive tumblers
TYPICAL ALL WELD METAL ANALYSIS ( % ):
| C | Si | Mn | Cr | Mo | V |
| 0,5 | 1,0 | 2,2 | 6,5 | 0,6 | 0,2 |
TYPICAL ALL WELD METAL MECHANICAL PROPERTIES
Hardness: 55 - 57 HRc
PARAMETER:
| Diameter | Voltage | Amps |
| 1,2 | 20-24 | 150-200 |
| 1,6 | 22-26 | 180-240 |
| 2,0 | 25-27 | 220-260 |
| 2,4 | 25-27 | 260-300 |
| 2,8 | 26-28 | 280-340 |
FORMS OF DELIVERY
| Coil "BS 300" = 15 kg | Coil "BS 450" = 25 kg | Drums = 300 kg |
Corodur Fülldraht GmbH may change the characteristics of the wire without notice. Statements on composition and application are just for the applier’s information. Statements on mechanical properties always refer to the all-weld-metal according to valid standards. We recommend the applier to check our products for their special application autonomously.