CORODUR® 733
CLASSIFICATION
DIN EN 14700 | DIN 8555
T Z Fe115 | MF 10-70-GT
GENERAL CHARACTERISTICS
CORODUR 733 is a flux cored wire electrode containing extremely hard Cr-carbides and niobiumcarbides embedded in a Fe- Cr- Nb- B- matrix with complex carbides. The weld deposit is very fine-grained and extremely hard. A hardness of 67 HRc in the first layer is possible. It is suitable for hardfacings of applications requiring high abrasion resistance with at the same time minor impact resistance and wear resistance up to a working temperature of up to 450° C
APPLICATION
Worm conveyer screws, sand-preparing plants, dredgers, mixers, ceramic industry, fan baffles, pump casings, briquetting plants etc.
TYPICAL ALL WELD METAL ANALYSIS (%):
C | Si | Mn | Cr | Nb | B |
4,0 | 0,8 | 1,5 | 19,0 | 4,0 | 1,5 |
TYPICAL ALL WELD METAL MECHANICAL PROPERTIES
Hardness pure weld metal: 66 - 68 HRc
PARAMETER
Diameter | Voltage | Amps |
1,2 | 20-24 | 150-200 |
1,6 | 22-26 | 180-240 |
2,0 | 25-27 | 220-260 |
2,4 | 25-27 | 260-300 |
2,8 | 26-28 | 280-340 |
FORMS OF DELIVERY
Coils "BS 300" = 15 kg | Coils "BS 450" = 25 kg | Drums = 300 kg |
Corodur Fülldraht GmbH may change the characteristics of the wire without notice. Statements on composition and application are just for the applier’s information. Statements on mechanical properties always refer to the all-weld-metal according to valid standards. We recommend the applier to check our products for their special application autonomously.