CORODUR® SP 103
Flux cored wires for Thermal Spray Application
EN ISO 14919 – 5 – 1,6 - 4
MATERIAL REVIEW
Flux cored wire composition based on iron used for abrasion and corrosion resistant coatings showing high bond strength. Coatings can be polished, and they are ductile and thermal resistant up to 870°C. Designed for arc spraying but may also be sprayed by wire- and high-velocity-wireflame-spraying.
APPLICATION
Used as erosion protection coating on water walls of boilers, cyclons, within steam turbines.
COMPOSITION (Weight.-% )
Fe | Cr | Ni | Si | B | Mo |
Mn |
Cu |
C |
Bal. | 25 | 10 | 1,2 | 2 | 4 | 1,2 | 2,0 | 0,5 |
PHYSICAL PROPERTIES OF THE COATING
Hardness: 45 HRC
Melting point: ~ 1210 °C
Spray rate: 2,3 kg/h / 100 A
SPRAY PROCEDURE (Arc)
Atomizing Air Pressure |
Nozzle Cap |
Arc Load Volt |
Ampere | Stand off mm |
Coating thickness / pass mm/pass |
Deposit Efficiency % |
|
Standard 1,6 | 3,5 bar | 30-32 | 100-200 | 75-125 | 0,125 | 70% |
SALES UNIT
Coil | "BS 300" = 15 kg | "BS 450" = 25 kg | Other dimensions on request |
Wire Diameter | 1,6 mm (1/16") | 2,4 mm |
Corodur Fülldraht GmbH may change the characteristics of the wire without notice. Statements on composition and application are just for the applier’s information. Statements on mechanical properties always refer to the all-weld-metal according to valid standards. We recommend the applier to check our products for their special application autonomously.