CORODUR® 55
CLASSIFICATION
DIN 8555 | DIN EN 14700
MF 10-60-GR | T Fe 14-60-GR
EIGENSCHAFTEN
CORODUR 55 is a tubular wire which deposits a high Cr-, C- alloyed stainless weld metal with excellent resistance to abrasion and medium impact. It can be used whenever high abrasion is expected. Best results are achieved by welding in two layers. A maximum deposit thickness of 10 mm is recommended. Before overlaying on old previously hard faced surfaces a buffering layer of CORODUR 200 K or CORODUR 250 K is recommended.CORODUR 55 is a self-shielded open-arc wire.
APPLICATION
pumps, mixer parts, conveyer screws
Typical all weld metal analysis %
C | SI | Mn | Cr | Ni | Mo |
4,8 | 1,2 | 0,6 | 29,0 | - | - |
Co | Nb | V | W | Fe | other |
- | - | - | - | - | - |
Parameter
Measurement | Voltage | Ampere |
1,2 |
18 - 25 |
120 - 180 - 28 30 300 - |
Forms of delivery
Kind | Coil BS 300 | Coil B 450 | Pay off pack | - |
Weight |
15kg | 25 kg | 300kg | - |
Corodur may change the chararcteristics of the wire without notice. Statements on composition an application are just for the applier's information. Statements on mechanical properties always refer to the all-weld-metal according to valid standards. We recommend the applier to check our products for their special application autonomously.